12/26/2023 0 Comments Download rufus 4.18![]() There may still be problems when you change which drives are connected (for example that you connect an internal drive). Let us assume that the computer boots nicely at reboot, with the same drives connected as when you created the Parrot system in the SD card (for example no internal drive connected). Reboot and you should be able to boot into your installed Parrot :-).Run the installed Parrot from the SD card Select the device pointing to the SD card.Install the GRUB boot loader, answer 'Yes'.(I will not describe all the steps here). Select 'Standard Installer' in the next small menu.It will bring you to a text mode installer, the old 'debian installer'. Select 'Install' near the bottom of the menu. ![]() create a new MSDOS partition table (via 'Device').There should be no partition, not even a partition table. In gparted you can 'see' the drive information.Things are safer, if you have disconnected all other drives (except the live drive and the SD card). Otherwise you may destroy important data in some other drive. It is very important to write to the SD card, which means that you must select the correct drive letter (for example a or b replacing X) for the SD card. The dd command will wipe the first mibibyte, which makes the installer more willing to install grub.The lsblk command will help you identify the target drive, the SD card Sudo dd if=/dev/zero of=/dev/sdX bs=1M count=1 Open a terminal window and run a few commands to prepare the SD card. Insert the SD card (I did it via a USB adapter). ![]() Select 'Live' at the top of the menu to get a graphical desktop environment How to install to an external drive (in this case an SD card) Things will be cleaner and easier, if you disconnect your internal drives, and use only the drives involved in this task. The graphical installer, that is available via the live system fails for me too as described in the question. ![]() It is difficult but possible to install Parrot into an SD card (at least 16 GB). The drive must be big enough (at least 4 GB). ![]() I think that it is a good idea to run Parrot live or persistent live from an external drive (USB pendrive, SD card. Cloning works well in order to create a live Parrot Security 4.4 64-bit drive. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |